Please keep in mind, timber changes colour and shape as it is “worked”, as it did when growing. It is not wholly unpredictable but don’t be too upset when this happens. If in doubt or concerned about what might happen just ask. As a guide, the drier and more boring the board, the less likely you will have issues. Regardless, inside, it will get darker and change in appearance from the sun. Timber outside can easily crack, twist and significantly change colour during the seasons.

Kiln drying is essential if you are to use the wood inside. We stock hardwoods air dried at 18% moisture content. We will kiln dry down to 12% for internal use. This takes, typical, 4-6 wks so please consider when planning. Drying in advance and storing in an industrial building till sold will only return moisture to the wood so we try and avoid this.

We will usually supply pieces a little over length with the ends cut by chain saw during felling. We can crosscut at 90deg. to within 2mm+ or – at additional cost.

Everything is “off the saw”, cut in house. We can thickness / plane wood as required at an additional cost.

We can ship nationally so please ask for a price with your order.

Select table tops or work tops, specific interesting pieces, up to 1.5m wide in one piece. Alternatively, select book-matched pieces if you need something wider still.

Send us a cutting list in metric, on Excel, if possible or give us a call.

For a contract milling, bring your timber for us to cut, we charge by the cubic meter.

Re-sawing / ripping and planing can we requested if you have over 1m3 to machine?

We will sell round timber too. If you have a requirement, ask!